Setting Default Custom Symbols for New One-lines

You can control which custom symbol template files are used for all new one-lines by setting the file locations.

Tip: If you want multiple users to have access to the same custom symbol template file, copy the file to a shared location on your network and then use file locations to point to the file.

To do this:

  1. Click Tools > Options > File Locations.
  2. Figure 1: File Locations

  3. Under Default Templates, next to One-line Symbols, click Browse to select a customized symbol file.
  4. Figure 2: Select Custom Symbol File

  5. Click Open. The custom symbols template is set for all new one-lines that are created after this point.
  6. Click OK to save your changes.
  7. Click Save to store the template changes.

When you create a new one-line, it uses the customized symbols from the file you specified. Any symbols that are not specified will use the default base symbols as set in Tools > Options > One-line Symbols. This does not affect one-lines that were created before the default template was selected. If you want to apply the new template to existing one-lines, you need to import the file into each one-line. See Importing a Symbol File for more information.

More Information

Customizing One-line Symbols Editing the Symbol File
Symbol Template Files Symbol Definition Tags
File Structure Additional Considerations
Removing the Custom Symbols Importing a Symbol File
     

www.easypower.com

EasyPower, LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower knowledge base

EasyPower Version 10.0

Copyright © 2018 EasyPower, LLC. All Rights Reserved.

Help was last updated on 5/22/2018